Guides

Step 1

How to Install HashyLink

Turn off your freeze dryer, access the internals, remove the ribbon cable, and plug HashyLink into the freed slots.

Original Notion source

Let’s get your HashyLink set up

  1. Turn off and unplug your freeze dryer. Make sure your condenser is turned off beforehand.
  2. Get access to the internals of your freeze dryer via the top or side panel.
  3. Carefully remove the standard grey 20-pin ribbon cable.
  4. Plug HashyLink into the two slots you just freed up.
HashyLink install overview

Use reference images for your model

We’ve included reference images in the opening guide to help you through installation on your specific model. We’ll add more videos as they become available.

Instagram reel reference
Instagram reel reference Original Notion page embedded this installation reference reel.

Next guides

Keep going

Install Opening Your Freeze Dryer

Find the right panel to remove, avoid stripped screws, and compare your internals against reference photos.

 Wi-Fi Connecting HashyLink to Wi-Fi

Use ESP SoftAP Provisioning to scan HashyLink, connect it to Wi-Fi, and return to the web app.

 Install Installing on Pro/Pharma Units

Reference the cartridge-style internals used on newer Harvest Right Pro and 2023 Pharma units.